ZEKS Eclipse
TM
90-5,000ZPB Desiccant Dryers
www.zeks.com
3
Nominal Flow
Type/Design
Voltage
Electrical
SCFM*
Series
(Dew
Point)
NEMA
Option
3.0 NOMENCLATURE
4.1 INSPECTION
Upon receiving your ZEKS air dryer, please inspect the unit
closely. If evidence of rough handling is detected, note it on
your delivery receipt, especially if the dryer will not be uncrated
immediately. Obtaining the delivery person’s signed agreement
to noted damages will facilitate submission of insurance claims.
4.2 UNPACKING AND HANDLING
Refer to labels on the dryer for the appropriate means for lifting
or moving the dryer. When lifting the dryer, ensure that no stress
is applied to the piping or the valves. Refer to SECTION 8.2 for
locating and mounting of the dryer.
The dryer can be rigged using the forklift rails that are welded to
the upper cross member that spans between the two vessels.
Use care when inserting fork tongs beneath these rails to avoid
damaging piping at the rear of the dryer.
4.0 RECEIVING AND INSPECTION
!
NOTICE
Nomenclature shown above represents standard
price sheet options. Other options are available -
refer to nomenclature insert speci
fi
c to your dryer
for details.
!
NOTICE
Under no circumstances should any person attempt
to lift heavy objects without proper lifting equipment
(i.e.: crane, hoist, slings or fork truck). Lifting any unit
without proper lifting equipment can cause serious
injury.
90
120
160
200
250
300
400
500
600
800
1,000
1,200
1,500
1,800
2,100
2,700
3,300
4,000
5,000
1 = 115-1-60 (-40°F)
G = 115-1-60 (-80°F)
B = 115-1-60 (-100°F)
2 = 230-1-60 (-40°F)
C = 230-1-60 (-100°F)
3 = 220-1-50 (-40°F)
E = 220-1-50 (-100°F)
0 = NEMA 1
H = NEMA 4
S = NEMA 4X
Stainless Steel
ZPB = Pressure Swing
*
Nominal Flows indicated are for 100°F inlet temperature, 100°F ambient temperature and 100 psig compressed air pressure.
0 = Standard
A = Failure-To-Shift (FTS)
B = High Humidity (HH)
C = FTS + HH
E = Dew Point Display
+ MLC (NEMA 4/4X)
G = Dew Point D MLC
+ FTS (NEMA 4/4X)
M = Moisture Load Control (MLC)
+ FTS (NEMA 1 only)
N = MLC + HH (NEMA 1 only)
