background image

Version 7.0
G-30-1781-en

Page 205

S100 / OPMI pico

Operation

Recording individual images and HD videos*

• Always check the following points (without the patient) before using the 

device:

– The monitor is switched on.

– The network cable connection is established or a USB medium is con-

nected, is detected and has sufficient memory capacity.

– The correct profile was selected (see Page 187).

– The correct patient has been selected (see Page 178) or "Short Term 

Memory Mode" is activated (see Page 188). 
The name of the patient or "Short Term Memory Mode" (1) appears in 
the header bar. 

Creating individual images

• To creat individual images (photos), press the <Capture> button on the re-

mote control, the video unit, the foot switch (if configured) or the web in-
terface.

Recording HD videos

• To start video recording, press the <Record> button on the remote con-

trol, the video unit, the foot switch (if configured) or the web interface.

During video recording, "Rec" (2), the duration of the recording (3) 
e.g. 00:00:08 and the remaining recording time (4) e.g. (348:26:22) 
appear in the footer bar. The "record" indicator light on the control 
unit lights up with an amber color.

While recording a video the photo function (Capture) can be used to 
create additional images.

Содержание S100/OPMI pico























































































































































































































































































Отзывы: