Zeiss S100/OPMI pico, Инструкция по эксплуатации

Страница: 137 / 278

Version 7.0
G-30-1781-en
Page 137
S100 / OPMI pico Operation
Initial start-up with integrated HD video camera
During the initial start of the surgical microscope with integrated HD video
camera, the sub menu "APPLICATION VARIANT" will be displayed for the first
time (see Page 163).
The application is set in this menu.
ZEISS Service adjusts this setting for you during initial start-up. You can read-
just this setting in the "INSTALLATION MENU". see “Opening the installation
menu (config)” on Page 155.
Opening the configuration menu (config)
The configuration menu allows you to make user-specific settings, such as se-
lecting a user or setting the brightness / color saturation.
• Press the <config> key to go to the configuration menu.
 The following menu appears on the monitor:
• Use the control keys to select a function.
 The selected function is displayed with an arrow.
• Use the control keys to change the settings.
If you need more information on a menu item, you can open the corre-
sponding sub menu by pressing the <enter> key. This sub menu provides
additional information on the setting options. The current setting is high-
lighted as the initial setting in this sub menu.
USER MENU STANDARD
 USER User 1 - 4
BRIGHTNESS AUTOMATIC - LOW AUTO -
MANUAL
LIGHTMETER SMALL SPOT - LARGE SPOT -
INTEGRAL
ORIENTATION STANDARD - MIRROR - FLIP -
ROTATE
ADVANCED ...
SERVICE MENU ...
EXIT