Zeiss S100/OPMI pico, Инструкция по эксплуатации

Страница: 140 / 278

Operation S100 / OPMI pico
Version 7.0
Page 140 G-30-1781-en
Proceed as follows to select a user and to load and activate the respective con-
figuration:
• Press the <config> key to access the configuration menu.
• In the Configuration menu, select the menu item "User" with the con-
trol keys and press the <enter> key.
 The following menu appears:
• Select the required user with the control keys.
 The selected user is displayed with an arrow.
• Press the <enter> key to temporarily save the user settings.
 The device switches back to the configuration menu. The user settings
are finally saved after you exit the configuration menu. If changes have
been made, a prompt is displayed for each user as to whether the set-
tings should be saved. Answer this prompt with "YES" or "NO".
• If you do not want to save any changes to the user, press:
– the <cancel> key to return to the configuration menu,
– the <config> or <live> key to return to live image mode.
USER SELECTION
 USER 1
USER 2
USER 3
USER 4
CANCEL
LOAD USER 1 SETTINGS