ZEISS
Start-Up and Operation
Primovert
18
415510-7244-001
12/2014
3.1.7
Mounting the Specimen Guide and
Inserting the Mounting Frame
•
If attached, remove the stage enlargement plate
from the right side of the stage.
•
Attach the specimen guide (Fig. 8/
2
) from
below to the right side of the stage (Fig. 8/
1
)
and fasten it with the two knurled screws
(Fig. 8/
3
) of the specimen guide.
•
Insert the universal mounting frame M or the
mounting frame for 96-position microtiter
plates (Fig. 8/
5
) into the specimen guide,
depending on the sample vessel used. Make
sure that the mounting frame stops properly in
the two fixing clips (Fig. 8/
4
).
•
For Petri dishes with 65 mm or 54 mm
diameter, insert the corresponding mounting
frame into the mounting frame for microtiter
plates.
If required, the mounting frame for Petri dishes d=35 mm can be inserted additionally into
the mounting frame for Petri dishes d=65 mm.
Fig. 8
Mounting the specimen guide and
inserting the mounting frame
