ZEISS
Notes on Instrument Safety
Primovert
8
415510-7244-001
12/2014
The microscope is not equipped with special devices for the protection from corrosive,
potentially infectious, toxic, and radioactive or other substances that may be hazardous to
health. If you handle such substances, be sure to observe all legal requirements, in particular
the relevant national accident prevention regulations.
−
Before transporting the instrument, switch it off and let it cool down (hot surface on the
lamp housing).
−
The plug-in power unit must not get in contact with moisture.
Obstruction or covering of ventilation slits may result in heat build-up which may damage the
instrument and in extreme cases cause fire. Always keep the ventilation slits clear and ensure
that no objects enter the instrument through the ventilation slits.
1.6
Warranty Notes
The Primovert microscopes including their original accessories must not be used for microscopic
techniques other than those described in this operating manual. The manufacturer cannot assume any
liability for other applications.
Please consider the following warranty notes for the microscopes:
−
The manufacturer guarantees that the device is free from material or manufacturing defects when
delivered.
−
Any defects must be notified to us immediately and steps be taken to minimize damage.
−
If notified of such a defect, the manufacturer is obligated to rectify it at its discretion, either by
repairing the instrument or by delivering an intact replacement.
−
No guarantee is provided for defects caused by natural wear (wearing parts in particular) and improper
use.
−
The instrument manufacturer shall not be liable for damage caused by faulty operation, negligence or
any other tampering with the microscope, particularly the removal or replacement of microscope
components, or the use of accessories from other manufacturers.
Unauthorized tampering with the instrument shall lead to a forfeit of all warranty claims.
