START-UP
ZEISS
Mounting standard components
Axiolab 5
66
430037-7444-001
05/2019
Fig. 3-19
Inserting the LED illuminator
•
Insert the new LED illuminator with the adapter (Fig. 3-19/
3
) into the holding tube up to the stop.
•
Position the new LED illuminator with the pinhole (Fig. 3-19/
5
) at the top, or with the adapter lower
front edge (Fig. 3-19/
4
) aligned between the contact surface and securing clips.
•
Plug the illuminator plug (Fig. 3-19/
2
) into the connector of the stand.
•
Lift the securing clips (Fig. 3-19/
1
) of the lamp holder until they are completely enclosed in the lamp
holder. In doing so, slightly press the ends of the securing clips together and guide past the two upper
retaining elements. Release the pressure until the clamping bracket opens and engages on both sides
in the retaining elements.
Reinserting the cover
•
Insert the lower edge of the cover (Fig. 3-15/
2
) into the retaining channels of the stand and swing
upwards until the clamping jaw (Fig. 3-15/
1
) locks in.
•
Reconnect the power cord.