START-UP
Axiolab 5
Mounting standard components
ZEISS
05/2019
430037-7444-001
65
Changing the LED illuminator
•
Press the loops (Fig. 3-17/
1
) on the securing clips of the lamp holder together and swing them out to
the front.
•
Remove the LED illuminator plug (Fig. 3-17/
2
) from the connector of the stand.
•
Pull the old LED illuminator with adapter (Fig. 3-17/
3
) out of the holding tube (Fig. 3-17/
1
).
Fig. 3-17
Removing the LED illuminator
•
Loosen the three side screws (Fig. 3-18/
4a
,
4b
,
4c
) with an Allen wrench (AF 2.5) (Fig. 3-18/
3
) and
remove the old LED illuminator (Fig. 3-18/
2
) from the adapter (Fig. 3-18/
1
).
•
Insert the new LED illuminator into the adapter and tighten the three side screws on the adapter.
Fig. 3-18
Changing the LED illuminator in the adapter