OPERATION
Carl Zeiss
Operating the motorized microscope via the touchscreen of the TFT display
Axio Imager
118
430000-7344-001
M70-2-0020 e 06/2009
(2)
Measure tab
This tab will be accessible only if you
use a motorized (CAN bus) stage.
Otherwise, the
Start
button and a
display for the Z-distance
Δ
Z are
displayed on the
Position
tab.
Using the controls on the
Measure
tab, the
operator can perform simple distance
measurements in millimeters (mm). Three options
are available for these measurements:
−
Distance between two manually set positions
−
Distance between a manually set position and a
defined position
−
Distance between two defined positions
If the Z distance shall be measured, activate the
with Z
button.
•
Move to initial position.
•
Press the
Start
button. On doing so, the display fields
Δ
X,
Δ
Y and
Δ
Z will be set to zero.
In the fields,
Δ
X,
Δ
Y and
Δ
Z, every stage movement is displayed.
The position buttons function as described under
(1) Position tab
above.
Fig. 4-54
Microscope -> XYZ-> Measure