OPERATION
Carl Zeiss
Operating the motorized microscope via the touchscreen of the TFT display
Axio Imager
128
430000-7344-001
M70-2-0020 e 06/2009
Adapter
Up to three buttons are displayed here dependent
on the equipment of the camera path deflection
and the tube used. The status of the ports is
detected by the system during initialization (and on
activation of the
Settings/Components
page).
•
To assign an adapter to a button, press the gray
button.
This will bring up the
Select Camera Adapter
list (Fig. 4-74).
•
Choose the installed adapter from the list using
the
▲
▼
buttons.
•
Press the
Save
button, to assign the selected
adapter to the port. Press the
Cancel
button to
close the window without any selection.
The button is now labeled with the magnification
factor. Proceed analogously for the other ports.
Splitter
Up to three buttons are displayed here dependent
on the equipment of the camera path deflection
and the tube used. The status of the ports is
detected by the system during initialization (and on
activation of the
Settings/Components
page).
•
To select a splitting ratio, press the gray button.
This will bring up the
Select Splitting Ratio
list.
•
Press the buttons for the desired splitting ratio;
multiple selections are possible.
•
Press the
Save
button, to store the selected
splitting ratio. Press the
Cancel
button to close
the window without any selection.
The button is now labeled with the splitting ratio.
Proceed analogously for the other ports.
The configured splitting ratios will be
offered then for selection on the
Light
Path
tab of the
Microscope/
Operation
page.
Fig. 4-74
Selecting the camera adapter
Fig. 4-75
Selecting the splitting ratio
