Zehnder Rittling ComfoFond-L Series, Руководство по установке

Страница: 70 / 92

EN - 6
4.2 Mounting on the wall
Mount the ComfoFond-L against a wall with a
minimum mass of 200 kg/m2. The Zehnder
support frame (available as an optional extra)
must be used for other walls. This reduces
contact noise as much as possible.
Comfond-L 350 ComfoFond-L 550
Make sure to leave a minimum space of 110 cm
in front of the ComfoFond-L in view of the
necessary maintenance work.
Where necessary, reposition the ComfoAir
Luxe documentation to make sure it is still
accessible following the installation of the
ComfoFond-L.
ComfoFond-L 350
1. Align the wall mounting bracket supplied
with the unit to the wall, ensuring it is level.
Both wall mounting brackets must be fitted
at the same height.
2. Place the ComfoFond-L in the wall
mounting bracket.
3. Fit the supplied insulation tape (A) between
the niche pipe and the connecting bend
(outside air) of the ComfoAir 350 Luxe.
This prevents condensation formation.
4. Installation
4.1 Connection of the air ducts
Take account of the following factors when
mounting air ducting:
Only use the supplied connecting material
between the ComfoFond-L and ComfoAir
Luxe;
Insulate the outside air supply duct between
the roof/wall passage to render the
ComfoFond-L damp proof. This prevents the
formation of condensation on the outside of
the ducts;
The air outlet on the ComfoFond-L must be
connected to the outside air connection on
the ComfoAir Luxe;
The air outlet on the ComfoFond-L 350 is on
the side of the ComfoFond-L at the top;
The air outlet on the ComfoFond-L 550 is on
the upper side of the ComfoFond-L;
The outside air must be connected to the air
inlet on the ComfoFond-L. The air inlet on
the ComfoFond-L is on the side of the
ComfoFond-L at the bottom.
ComfoFond-L
350 ComfoFond-L 350
Left Right
ComfoFond-L
550 ComfoFond-L 550
Left Right