Zehnder Rittling ComfoFond-L Series, Руководство по установке

Страница: 67 / 92

3 - EN
3. Installation conditions and
dimensional sketches
In order to determine whether the ComfoFond-L
can be installed in a certain area, the following
aspects must be taken into account:
The system must be fitted to allow sufficient
room around the ComfoFond-L and ComfoAir
Luxe for the air connections and brine loops
as well as for carrying out maintenance
activities;
The room must offer the following provisions:
- Air duct connections.
- 230V electrical connection.
- Provisions for the condensation drain.
- Brine loops for the pipe system.
The ComfoFond-L must be installed in a
frost-free space;
The brine in the system must not freeze.
Irreversible damage will be caused to the
machine if the brine freezes.
The condensation must be drained off
frost-free, at a gradient, using a siphon;
We recommend that the ComfoFond-L is not
installed in spaces with a higher average
humidity (such as a bathroom or toilet). This
is to prevent the formation of condensation
on the outside of the ComfoFond-L;
An outer valve is a requirement if the system
is used in areas where the temperature is
lower than -15ºC. This valve must shut off the
supply air in the event of a power failure.
The system can be damaged during a power
failure at temperatures lower than -15ºC, this
is why an outer valve is a requirement.