Zehnder Rittling ComfoFond-L Series, Руководство по установке

Страница: 71 / 92

7 - EN
A
A. Insulating belt
4. Tape off (not included) all air connections
on the ComfoFond-L and the ComfoAir
Luxe vapour-proof.
5. Fit the condensation drain to the
underneath of the ComfoFond-L.
ComfoFond-L 550
1 Align the wall mounting bracket supplied
with the unit to the wall, ensuring it is level.
Both wall mounting brackets must be fitted
at the same height.
2. Place the ComfoFond-L in the wall
mounting bracket.
3. Place the metal sleeve joint (A) on the niche
pipe (outside air) of the ComfoAir 550 Luxe.
4. Use the plastic sleeve joint to connect both
90º connection bends (B).
5. Place the connected 90º connection bends
on the metal sleeve joint (A) of the ComfoAir
and the air exhaust of the ComfoFond-L.
6. Tape off (not included) the plastic sleeve
joint (B) and all air connections on the
ComfoFond-L and the ComfoAir Luxe
vapour-proof.
A. Metal sleeve joint
B. Plastic sleeve joint
7. Fit the condensation drain to the
underneath of the ComfoFond-L.
4.3 Connecting the condensation drain
Take account of the following factors when
fitting the condensation drain:
The condensation must be drained off
frost-free, at a gradient, using an appropriate
siphon;
Connect the condensation drain (air-tight) via
a pipe or a hose with a siphon (with a water
seal of at least 60mm) to the sanitary
pipework;
Position the upper edge of the siphon at least
60 mm underneath the condensation drain of
the ComfoFond-L.
ComfoFond-L
350