- 6 -
16.
SAVE PV CURVE
Enter menu and move to
Save PV Curve
with pressing + or - and then press enter .
Now you can select position number to which you want to save your ignition curve set, with
pressing + or - and then press enter .
17.
Set PV Curve
Enter menu and move to
Set PV Curve
with pressing + or - and then press enter .
Now you are in submenu for setting valve curve.
Submenu organisation:
Nr. of Points
- number of valve curve points (from 2 to 8)
1)
- first valve position point
2)
- second valve position point
... ...
... ...
Exit
- exit submenu
Important!
To avoid wrong processing, don't make unreasonable curve course.
Every time you make any changes to valve curve, it is automatically saved to #0 position.
Then you can save it to any other position number from #1 to #5.
17.1. Change Number of Curve Points
Move to
Nr. of Points
with pressing + or - and then press enter .
Now you can select number of curve points, with pressing + or - and then press enter .
17.2. Change Parameters of Valve Position Curve Points
Move to point you want to change, with pressing + or - and then press enter .
Now you can change rev point with pressing + or - (in 100 rpm steps) and then press
enter .
Now you can change valve position from 0% to 100%, with pressing + or - (in 1% steps)
and then press enter .
18. Deviation
Enter menu and move to
Deviation
with pressing + or - and then press enter .
Now you can change deviation from 2% to 20% with pressing + or - (in 1% steps) and then
press enter .