Zebra ZebraStat ZS-2, Руководство по эксплуатации

Страница: 16 / 20

16
Activation Mode
Activation mode is similair to having a remote-
controlled thermostat. Technicians often use
this mode when the thermostat is not easily
accessible, as in when making a diagnosis or
repair to equipment in an attic, basement, on
a roof, or other location remote from the area
where the thermostat is located.
1) Turn all thermostat functions to OFF.
2) Turn all of the
ZebraStat
’s component
switches to OFF, and put the Mode Switch in
the ANALYZE position.
3) Attach the
ZebraStat
’s component lead’s
alligator clips to the appropriate equipment
wires, then attach the Red and Blue leads to
the equipment’s 24VAC hot and common wires,
observing polarity.
4) Verify that no yellow LED’s are lit before
proceeeding. If any are, recheck thermostat for
ON (or wiring for shorts) before continuing.