Start of Configuration
BAR CODE IDENTIFIER CODE SETTING
The series RS-232C and keyboard emulation type
scanners can set max. 2 digits of bar code identifier
code according to different bar code. The procedure
is as following:
1. Scan “Start of configuration” label
2. Scan “Bar code identifier setting code” label.
3. Scan the new code mark from ASCII table (max.
two digits). For example, if “AB” want for code
mark then scan “A” and “B”.
4. Scan “Set” label.
5. Scan “ End of configuration” label.
UPC-E
UPC-A
EAN-13
EAN-8
Chinese post code
ITF 2 OF 5
Codabar
12
Code 39
Code 128
Code 93
MSI
MATRIX 25
Set
RS-232C SERIAL COMMUNICATION
PARAMETERS SETTING
HANDSHAKING PROTOCOL
None
RTS/CTS
End of Configuration
13
