8
Function of the Zeagle System
Clips must be
attached to vest.
Surface Buoyancy
Label Location
Do NOT dive with the two forward small side release buckles detached!
Bladder Assembly
There are three basic bladder assemblies used on Zeagle BC’s. The bladder
assembly attaches to the vest section via two straps which slide through the
webbing at the back of the vest under the tank bands (see cylinder band
illustration on pages 10 & 11) and two buckles which clip over the weight
pockets to hold the buoyancy forward. Do not dive with the two forward small
side release buckles detached! The shoulder straps should pass through the
collar at the top of the bladder assembly.
NEVER breathe from the bladder assembly. The bladder assembly
was not designed as an auxiliary air source and may contain
harmful contaminants, which if inhaled, may cause injury or death.
Shoulder strap
through collar
Straps through
backplate webbing
