14
Proper Fit
The Zeagle System allows the diver to size each component of the buoyancy
system independently for a true custom fit. For proper performance please be
sure that your system fits as described below. Put BC on (before attaching to
SCUBA cylinder) and adjust shoulders and waist as follows.
1. Loosen shoulder straps before donning.
Put it on like you would a jacket. If your
system is equipped with side panels, stretch
the elastic by extending each side panel as
far as possible before wrapping it around
you and fastening the touch fastener
material.
3. Fasten the sternum strap. It should be
just above the breast line. If wearing a dry
suit, be sure that sternum strap does not
obstruct drysuit inflator hose or valve.
2. The system should be worn low with the
bottom of the vest at the top of your hips,
once side panels are secure. Clip waist
strap and tighten snugly.
4. Adjust shoulder straps
Fitting and Assembly
