17
Pre-dive Assembly and Inspection
• Return Ripcord handle to secure position.
• Pull cord through for the right weight pocket.
• Start with the loop closest to the Ripcord handle.
• Each white nylon loop is threaded through three grommets. The
cord is then threaded through the end of the white loop.
• Thread cord under webbing that is between the grommets.
• Repeat for all nylon loops.
• Finish by pushing cord between pocket and vest.
• Repeat on opposite pocket.
Cord
If the Ripcord is not completely secure, rethread using the following procedure.
Nylon Loops
Cord
Rethreading The Ripcord
TM
System
Check to see that weight release system is secure.
Trim Weight™, Pull-Out Pocket ™ Touch Fastener System - Check to see that
the touch fastener material flap on the bottom and sides of each weight pocket
completely overlaps and is secure.
Trim Weight™
Pull-Out™
