23
Maintenance
Use of non-factory parts or accessories, or any change to the product not
specifically authorized by Zeagle Systems, Inc., or performed by an unautho-
rized repair facility, may cause improper operation, damage, or leakage of the
BC resulting in a loss of buoyancy control or air holding capability. This
could result in injury or death, plus will void your warranty. Replace worn or
damaged items with approved, factory supplied or specified parts ONLY.
The reliability and correct functioning of your equipment
depends on the care it receives.
Post Dive BC Cleaning:
•
Rinse thoroughly with fresh water after each use.
•
Rinse inside of bladder by holding exhaust button on inflator system open
and allowing fresh water to partially fill the bladder. “Slosh” the water
around to dissolve any salt crystals (salt crystals can damage the bladder
over time). Drain completely and repeat.
•
Hang upside down and allow to dry partially inflated. Drain any residual
water through the exhaust hose while hanging upside down.
•
Store partially inflated in a cool dry place.
Inspection and Service Interval
Your BC should be inspected and maintained by an Authorized Zeagle Dealer
at least once a year, and more often if you dive frequently. This is a required
action to keep your warranty in effect. There is a Service Record in the back of
this manual for the Dealer to record the service performed.
Installation of New Parts/ Alterations
