Solo documento principale.
Ident
ific
at
ion:
M
D
-AL
-GI
-00
R
ev
. 4
.0
of
31.
01.
18
-
Appl
ic
at
ion
: G
ID
Pile Reg. IT12110P00002965 -
Share Capital € 100,000.00 fully paid up
AR Bus. Reg. no. 03225010481
– AR REA no. - 94189
Certified Company ISO 9001 - Certificate no. 9151 - CNS0 - IT-17778
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
tel. +39 055 91971 - fax. +39 055 9197515
[email protected] - [email protected] -
zcsazzurro.com
Manual of 25/08/2020 Rev. 1.2 “User Manual 7000-BE-24”
29/43
7.
Configuration
7.1.
Procedure
1)
After installing the charging station properly (see sections 3, 4, 5, and 6), power it up and check that
the display doesn't show any faults or errors, and that the LED line is not flashing green. The keypad
consists of 4 keys, indicated here below.
Back
Next
Cancel/Back
Confirm/Enter
Figure 21 - Control keypad
2)
Press the Confirm/Enter key for at least 10 seconds
3)
The screen shown in Figure 22 appears; use the Next, Back and Confirm/Enter keys to write the
password. Password: 123456
Figure 22 - Password selection screen
4)
If the password is entered correctly, the page shown in Figure 23 opens, which contains all the
device configurations. The menu items can be selected using the Next and Back keys.
Configuration is necessary for the commissioning of the electric vehicle
charging station; without it the charger may not work or may work
incorrectly
Note
Enter 6-digit PWD
1 2 3 4 5 6 7 8 9 0
