Zcom WS5G2, Руководство пользователя

Страница: 33 / 78

Hyperion Series Wireless LAN Controller User Manual
58-150008-IQN_V1.0 Page 30
Parameter Description
Next Hop When the destination IP of a packet is matched with the above specific one, it will
be directed to the IP address here to for further routing.
Subnet Mask Allocate a netmask to the segment of public IP address to divide which subnet it is
belonged to.
Click the Add button to append a new entry to the list.
Click the Apply button to accept the changes.
Click the Cancel button to discard the changes.
Click the Delete button to remove the selected entry.
Click the Edit button to modify the selected entry.
4.12. D
YNAMIC
R
OUTE
Dynamic routing is different from static routing. The next hop of dynamic routing is automatically selected by algorithm,
rather than manually specified. The routing algorithm is based on routing protocols including RIPv1 and OSPF. Need to
bind dynamic routing to the VLAN interface (VIF) through which the user service traffic passes and routes to the
destination.
Select
[Network > Dynamic Route] in the menu to enter the configuration page as following:
Figure 4-18 Dynamic Rote Configuration Page
These parameters in
[Network > Dynamic Route] page is described in details as following:
Parameter Description
Enable Dynamic Routing This switch is used to open the dynamic routing function for WLC.
Interface Binding the dynamic routing function to specific VLAN Interface through which the
user services traffic passes.
Dynamic Routing Protocol Select the proper dynamic routing protocol: RIP or OSPF .
Click the Add button to append a new entry to the list.
Click the Apply button to accept the changes.
Click the Cancel button to discard the changes.
Click the Delete button to remove the selected entry.
Click the Edit button to modify the selected entry.