Zcom WS5G2, Руководство пользователя

Страница: 13 / 78

Hyperion Series Wireless LAN Controller User Manual
58-150008-IQN_V1.0 Page 10
Parameter Description
WLC. It is used for customer to configure or maintain the WLC. However, in
practical applications, it is also used as the heartbeat port for 1+1 backup.
Default value is
192.168.2.228 .

Management Port Netmask: The netmask is used to divide which subnet
the management port is belonged to.

Default Gateway IP Address: The default gateway is used to process data
packets whose destination IP address is not in the same subnet as the
current network. If it is necessary to route data packets to another subnet
or the Internet, you must specify it.

DNS Server IP Address: The DNS server is used to convert domain names
into IP addresses during Internet access. Entering the available DNS IP
address here.
DHCP Configuration

Enable Internal DHCP: WLC has the DHCP server built in. In practical
applications, DHCP server could be either provided externally or internally.
If no external DHCP server provided, customer can use WLC built-in DHCP
server here by enabling it.

DHCP Option43: This is an option for DHCP protocol. Option 43 of DHCP
is used to deliver the WLC IP address to tell thin AP where to establish the
CAPWAP management tunnel.

DHCP Pool Start-End IP Addresses: The built-in DHCP server of WLC uses
this IP address pool to allocate IP addresses to thin APs and user clients.
The start IP and end IP limit the range of available IP addresses.

DHCP Default Gateway IP Address: This default gateway IP address can
be allocated to thin APs or user clients through the built-in DHCP server.
Authentication Configuration

Authentication Server: Select whether using the WLC built-in Portal /
Radius server or external Portal / Radius server for authentication purpose:
o
Internal Portal&Radius: WLC built-in Portal / Radius server as the
authentication server.
o External Portal&Radius: External 3’rd party Portal / Radius server as
the authentication server.

OTP SMS Gateway: OTP stands for ‘ O ne T ime P assword’. The password
generated by WLC will be delivered in the short message for user to input it
in the Captive Portal page for authentication. Therefore, the SMS gateway
providing OTP service must be designated. Here now have two options of
‘aliyun’ and ‘every8D’ for customer to select.
Note: Before this configuration, customer must have registered as
the legal subscriber of SMS gateway and have the user name and
password officially released.

Radius Configuration: This is a hyperlink to Radius Server configuration
page. Customer can get there to have related parameters set.

Portal Configuration: This is a hyperlink to Portal Server configuration
page. Customer can get there to have related parameters set.