Zcom WS5G2, Руководство пользователя

Страница: 17 / 78

Hyperion Series Wireless LAN Controller User Manual
58-150008-IQN_V1.0 Page 14
Parameter Description
AP management and the central switching for user data traffic.

Non-WLC: This port is allocated to Linux OS or other applications running
in this platform.
Click the Apply button to accept the changes.
Note: Usually one or two ports being allocated to WLC usage are sufficient for most of Wi-Fi system
networking requirements!
Note: If the Port Classification is changed, it must reboot WLC to make it being effective!
4.2. AP A
CCESS
P
ORT
The port in WLC used to connect the thin AP is the ‘AP Access Port’, and it is also called as WLAN port. This port is the
WLC southbound interface for establishing the CAPWAP tunnel with thin AP.
Select
[Network > AP Access Port] in the menu to enter the configuration page as following:
Figure 4-2 AP Access Port Configuration
These parameters in
[Network > AP Access Port] page is described in details as following:
Parameter Description
VLAN ID Allocate a VLAN ID to the ’AP Access Port’ for AP management which is distinguished
with service VLAN of user client.
Note: This VLAN ID cannot be any value, it must be an available VLAN which
is previously created in [ Network > VLAN ].
IPv6 Address It is necessary to allocate an IPv6 address to the ‘AP Access Port’ if the WLC is
deployed in an IPv6 network.
Primary IP Address Allocate an IPv4 address to the ‘AP Access Port’ as the primary IP address.
Secondary IP Address Allocate an IPv4 address to the ‘AP Access Port’ as the secondary IP address for