Zcom WS5G2, Руководство пользователя

Страница: 54 / 78

Hyperion Series Wireless LAN Controller User Manual
58-150008-IQN_V1.0 Page 51
Parameter Description

AP Traffic Difference - If the balance mode " Traffic " is selected, set
the maximum throughput difference allowed between two thin APs
here. When the traffic throughput difference reaches this threshold,
any new client attempting to associate with the AP who has heavier
traffic will be rejected.
Spectrum Navigation The so called “Spectrum Navigation” actually refers to the load balance
between two radio modules in the dual-band thin AP.

Enable Spectrum Navigation - Open the spectrum navigation
function and balance the loading between radio modules followed by
the policy below:
o Disable - No load balance for this AP group.
o Users Number - Select the users number difference as the policy to
balance the loading of two radio modules in dual-band thin AP.
o Channel Loading - Select the channel busyness as the policy to
balance the loading of two radio modules in dual-band thin AP.

Channel Usage - If Channel Loading is selected in “Enable Spectrum
Navigation”, here to set the channel usage rate threshold to indicate
the channel busyness and idleness. When the channel usage of radio
module touches this threshold, any new client attempting to associate
with this radio module will be rejected.

Users Number Difference Between Modules - If Users Number is
selected in “Enable Spectrum Navigation”, here to set the users number
difference threshold between two radio modules. When the difference
number touches this threshold, any new client attempting to associate
with the radio module who has more users will be rejected.

Reject Time Window - If a user client is rejected by the radio module
due to load balancing, this module will not accept the association
request from the rejected client anymore until the reject time window
shifted off.
Auto Channel Settings The Auto Channel policy configured here will globally affect thin APs in all
group by overlaying the thin AP its own auto channel selection policy
configured in wireless profile as long as the “Channel Selection” mode in the
wireless profile is enabled by the
Auto Channel option:

Enable Auto Channel Select: Click the radio button to enable auto
channel function for thin AP.

Auto Channel Adjust Period: Thin AP switching its operating channel
automatically is a dynamic process variation with the RF environment,
so it performs intermittently. The time interval of channel switching is
set here. The value is neither too short nor too long, both will degrade
system performance.

Anchor Time: This is used to specify the time in a day when the
automatic channel function works. At other times, the automatic
channel function remains inactive.

Auto Channel Close Threshold: During automatic channel switching,