Zcom WS5G2, Руководство пользователя

Страница: 32 / 78

Hyperion Series Wireless LAN Controller User Manual
58-150008-IQN_V1.0 Page 29
Parameter Description
Private IP Address This is the private network at NAT inner side specified by the IP address with its
subnet mask length.
Public Start IP Address This is the NAT outer side 1’st IP address facing the public network.
Public End IP Address This is the NAT outer side last IP address facing the public network.
Subnet Mask Allocate a netmask to the segment of public IP address to divide which subnet it is
belonged to.
Click the Add button to append a new entry to the list.
Click the Apply button to accept the changes.
Click the Cancel button to discard the changes.
Click the Delete button to remove the selected entry.
Click the Edit button to modify the selected entry.
4.11. S
TATIC
R
OUTE
When a data packet is sent to a specific target IP address in a different subnet from the originator, since the route is
unknown, the customer can specify a known next hop for the data packet and reach the destination hop by hop.
Binding the known next hop to a specific target IP address is configuring the static routing.
Select
[Network > Static Route] in the menu to enter the configuration page as following:
Figure 4-17 Static Rote Configuration Page
These parameters in
[Network > Static Route] page is described in details as following:
Parameter Description
Destination IP Address This is the specific IP address which should be matched with packet destination IP
address for routing to a known next hop.
Subnet Mask Allocate a netmask to this specific destination IP address to divide which subnet it is
belonged to.