SP230/SP230-S5
2x2 PtP/PtMP 802.11ac Wave 2 Outdoor Access Point
User Manual
Page 9
Anti-theft Steel Rope (Optional accessory_SP-CBM5)
3.3.
Insert three of anti-theft screws (included
in the packaging) to the device through
the mounting bracket. Securely tighten
these three screws.
Encircle the anti-theft steel rope around the pole,
and insert the last anti-theft screw (included in the
packaging) to the device with one side of anti-theft
steel rope. Securely tighten the screw.
Grounding Connection & Protect from Lightning
3.4.
1.
Make your device GND port connect to ground wire.
2.
The ground wire connects to the earth. In addition, the
grounding wire meets to 6-AWG copper grounding wire.
Safety Notice
3.5.
1.
Do not install the device close to any electrical grounding device or lightning protection
system. Place the device’s own grounding and lightning protection system apart from any
electrical grounding device and lightning protection system as far as possible.
Note:
Be sure that grounding is available and that it
must comply with local and national electrical codes.
For additional lightning protection, use lightning rods
and lightning arrestors.
