SP230/SP230-S5
2x2 PtP/PtMP 802.11ac Wave 2 Outdoor Access Point
User Manual
Page 13
Status
4.2.2.
4.2.2.1.
Overview
This page is used to provide an overview of the software settings and status of the AP. The
following parameters are available in this section:
Parameter
Description
Kernel Version
Displays the Linux kernel version.
Load Average
Displays the average system load calculated over a given period of time of 1,
5 and 15 minutes.
The following parameters are available in this section:
Parameter
Description
Total Available
Displays the total memory supported by the AP in kilobytes and percentage.
Free
Displays the free memory on the AP in kilobytes and percentage.
Cached
Displays the cached memory on the AP in kilobytes and percentage.
Buffered
Displays the buffered memory on the AP in kilobytes and percentage.
The following parameters are available in this section:
Parameter
Description
IPv4 WAN Status
Displays the IPv4 WAN (Wide Area Network) connection status.
Active Connections Displays the number of active network connections in integers and
percentage.
4.2.2.2.
General
Next click the General Button. Once login, first assign a fixed IP address or a DHCP IP to the AP
under Current IP Setting. Under Wireless Switch Setting, select Connect with Wireless Switch via IP
and input the IP address of the AP access controller, then click save & apply to take effect.
Parameter
Description
ipMod
Displays basic mode information of the ipMod.
IPv4 – Select IPv4 mode.
IPv6 - Select IPv6 mode.
Auto – Auto detected if it is IPv4 or IPv6.
DHCP Client
Choose the DHCP Client, which is Close, or Open by default
it will be Open.
Default Gateway
Enter the IPv4 address of the gateway for the interface.
Primary/Secondary DNS Server
Enter primary/secondary DNS server. (if require the second
one)
