SP230/SP230-S5
2x2 PtP/PtMP 802.11ac Wave 2 Outdoor Access Point
User Manual
Page 27
Parameter
Description
Force
Select this option to force the DHCP server function on the AP to assign
IPv4 addresses to DHCP clients on the network even if another DHCP
server is detected.
DHCP Options
Enter the DHCP Option string for DHCP clients here.
4.3.3.1.2.
DHCP Client
The following parameters are available in this section:
Parameter
Description
Status
Please refer to page 23.
After clicking the Switch protocol button, the following will appear:
The following parameters are available in this section:
Parameter
Description
Status
Please refer to page 23.
Hostname to send when
Enter the hostname that is sent when requesting DHCP here.