Page 19
5.1 DESCRIPTION OF PROGRAMMABLE FUNCTIONS (OPTIONS).
Using the CONFIG MENU of the console, it is possible to select from the following
options:
SUBMENU “SET OPTIONS”:
1
HOUR COUNTER:
- RUNNING:
The counter registers travel time only.
- KEY ON:
The counter registers when the key switch is Closed.
2
BRUSH SWITCH:
- PRESENT:
The Brush Switch provides an input signal from the
motor brushes.
- OPTION #2:
The Brush Switch Input may be used as a Second Speed
Reduction.
3
ENABLE SWITCH:
- PRESENT:
The Enable Switch provides an input from the pedal
accelerator.
- OPTION #3:
The Enable Switch input may be used as a Third Speed
Reduction.
4
AUX FUNCTION:
- OPTION #1:
The output on Pin B6 provides a Negative supply to a
fan.
- HYDRO CONT.:
The output on Pin B6 provides a Negative supply to the
coil of a steering Contactor.
5
SET BATTERY TYPE:
This option allows selection of the Nominal Battery Volt-
age.
Содержание SEM2
Страница 15: ...Page 15 3 6 MECHANICAL DRAWING DIMENSIONS...
Страница 17: ...Page 17 4 3 DESCRIPTION OF STANDARD CONSOLE MENU...
Страница 24: ...Page 24 5 4 SEM 2 TRACTION STANDARD WIRING DIAGRAMS...
Страница 38: ...INSTALLATION AND USER MANUAL CHOPPER SEM2...
