background image

guards incorporated in the appliance. The use of inappropriate

guards can cause accidents.

SAFETY INSTRUCTIONS

This appliance is suitable for the following markets:

EG

INSTALLATION

WARNING! Only a qualified person

must install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instructions supplied with

the appliance.

• Always take care when moving the appliance as

it is heavy. Always use safety gloves and

enclosed footwear.

• Do not pull the appliance by the handle.

• The kitchen cabinet and the recess must have

suitable dimensions.

• Keep the minimum distance from other

appliances and units.

• Make sure that the appliance is installed below

and adjacent safe structures.

• Parts of the appliance carry current. Close the

appliance with furniture to prevent touching the

dangerous parts.

• The sides of the appliance must stay adjacent to

appliances or units with the same height.

• Do not install the appliance adjacent to a door

or under a window. This prevents hot cookware

to fall from the appliance when the door or the

window is opened.

ELECTRICAL CONNECTION

WARNING! Risk of fire and electric

shock.

• All electrical connections should be made by a

qualified electrician.

• The appliance must be earthed.

• Make sure that the parameters on the rating

plate are compatible with the electrical ratings

of the mains power supply.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and extension

cables.

• Do not let mains cables touch or come near the

appliance door, especially when the door is hot.

• The shock protection of live and insulated parts

must be fastened in such a way that it cannot be

removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure that

there is access to the mains plug after the

installation.

• If the mains socket is loose, do not connect the

mains plug.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips

and contactors.

• The electrical installation must have an isolation

device which lets you disconnect the appliance

from the mains at all poles. The isolation device

must have a contact opening width of minimum

3 mm.

• Fully close the appliance door, before you

connect the mains plug to the mains socket.

GAS CONNECTION
• All gas connections should be made by a

qualified person.

• Before installation, make sure that the local

distribution conditions (nature of the gas and

gas pressure) and the adjustment of the

appliance are compatible.

• Make sure that there is air circulation around the

appliance.

• The information about the gas supply is on the

rating plate.

• This appliance is not connected to a device,

which evacuates the products of combustion.

Make sure to connect the appliance according

to current installation regulations. Pay attention

to requirements regarding adequate ventilation.

USE

WARNING! Risk of injury and burns.

Risk of electrical shock.

• This appliance is for household use only.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings are not

blocked.

4

Содержание ZCG64396XA





























Отзывы: