Refrigeration unit
Series Zero Direct-Drive
Z200 | Z250 | Z350 | Z380
Z380 Multi
INSTALLATION MANUAL
rev.01
41
3.4 Removal and mounting of the flaps of the condenser unit
CAUTION
DO NOT remove the side frame from the front, as shown in Figure 45, to avoid
damaging the unit.
Follow the procedure below to remove the flap.
Figure 45 - Wrong removal of the side frame.
3.4.1 Removal
To remove the side frames of the condenser unit, proceed as follows:
•
Unscrew the screws (A, Figure 46) with the appropriate tool
Figure 46 - Fastening screws on the side of the machine
•
Slide the side to the front wall for at least 3 cm [1.18 in].
Figure 47 - Sliding the side frame
