Zanotti Zer0 120, Руководство по ремонту

Страница: 9 / 74

2
Refrigeration oil
Avoid refrigeration oil contact with the eyes. Avoid prolonged or repeated contact of refrigeration oil with skin or
clothing. Wash thoroughly after handling refrigeration oil to prevent irritation. In case of eye contact, immediately
flush with plenty of water for at least 15 minutes. Wash skin with soap and water. CONTACT A PHYSICIAN.
Electrical Hazards (High voltage)
When servicing or repairing a refrigeration unit, the possibility of serious or even fatal injury from electrical shock
exists. Extreme care must be used when working with an operating refrigeration unit. Lethal voltage potentials can
exist on connections in the high voltage tray of the control box.
Precautions:
1. When working on high voltage circuits on the refrigeration unit, do not make any rapid moves.
If a tool drops, do not grab for it. People do not touch high voltage wires on purpose! It occurs
from an unplanned movement or action.
2. Use tools with insulated handles that are in good condition. Never hold metal tools in your
hand if exposed, energized conductors are within reach.
3. Treat all wires and connections as high voltage until a meter and wiring diagram show
otherwise.
4. Never work alone on high voltage circuits on the refrigeration unit, another person should
always be standing by in the event of an accident to shut off the refrigeration unit and to aid
a victim.
5. Have electrically insulated gloves, cable cutters and safety glasses available in the immediate
vicinity in the event of an accident. IMMEDIATE action must be initiated after a person has
received an electrical shock. Obtain immediate medical assistance if available. The source of
shock must be immediately removed by either shutting down the power or removing the
victim from the source. If it is not possible to shut off the power, the wire should be cut with
either an insulated instrument (e.g., a wooden handled axe or cable cutters with heavy
insulated handles) or by a rescuer wearing electrically insulated gloves and safety glasses.
Whichever method is used. Do not look at the wire while it is being cut. The ensuing flash can
cause burns and blindness. If the victim has to be removed from a live circuit, pull the victim
off with a non-conductive material. Use the victim’s coat, a rope, wood, or loop your belt
around the victim’s leg or arm and pull the victim off. DO NOT TOUCH the victim. You can
receive a shock from current flowing through the victim’s body. After separating the victim
from power source, check immediately for the presence of a pulse and respiration. If a pulse
is not present, start CPR (Cardio Pulmonary Resuscitation) and call for emergency medical
assistance.