ZANOLLI SYNTHESIS 08/50 V PW GAS Скачать руководство пользователя страница 8

Страница: 8 / 68

3. TECHNICAL SPECIFICATIONS

SYNTHESIS GAS

3. TECHNICAL SPECIFICATIONS

3.1. Identifying the product

This manual refers to conveyor oven

SYNTHESIS gas

3.2. Directives compliance

The oven

SYNTHESIS

carry the

obligatory mark, that guaranteeing

their conforming to the following European directives:

2014/35/CE low current directive;
2014/30/CE electromagnetic compatibility directive;
2006/42/CE machines directive;
2009/142/CE Gas Directive
1935/2004/CE Regulation objects destined for coming into contact with

food products.

3.3. Foreseen range of use

The gas conveyor oven mod. Synthesis is designed to cook pizza, or

similar products. It is intended for professional use in the catering industry
(restaurant, pizza shop, etc..).

The normal operations are the loading and unloading of products on the

conveyor, the switching on, adjusting, switching off and cleaning of the
appliance.

The use to which the product should be put as stated above and the

configurations foreseen for this equipment are the only ones authorized by
the Manufacturer.

Do not use these machines in any way other than

that indicated in the instructions provided.

The use intended is only valid for equipment which is in good

structural, mechanical and electrical condition.

3.4. Technical Specifications

For technical specifications refer to the following technical annexes at

the end of this manual:

A. Technical Specifications
B. Connections
C. Wiring diagrams
D. Exploded views

Содержание SYNTHESIS 08/50 V PW GAS





































































Результаты поиска

Содержание SYNTHESIS 08/50 V PW GAS

Отзывы:

Похожие инструкции для SYNTHESIS 08/50 V PW GAS

Бренды по названию

Популярные бренды

ZANOLLI SYNTHESIS 08/50 V PW GAS, Руководство по установке

Результаты поиска

Содержание SYNTHESIS 08/50 V PW GAS

Отзывы:

Похожие инструкции для SYNTHESIS 08/50 V PW GAS

Бренды по названию

Популярные бренды