ZANOLLI SYNTHESIS 08/50 V PW GAS, Руководство по установке

Страница: 14 / 68

4. INSTALLATION
14 SYNTHESIS GAS
ATTENTION! Carry out the installation of the oven according to
the standard defined by the norms in force for this type of equipment
in the country in which it is being installed. For more information
refer to these norms.
To find out the nominal heat input of your oven, see Enclosure
A When more than one or more cooking units are stacked one on top
of another, to calculate the nominal heat input simply sum the power
of each single unit.
The area in which the units will be housed must have at least two
permanent apertures leading directly through its walls leading into the open
air:
-
one for the intake of combustion air, ventilating the room
- the other for disposing of combustion gasses, aerating the room.
The two apertures must be in such a position so as not to create a short-
circuit in the flow of air: preferably they should be at opposite ends of the
room, they must not be obstructed and must be protected with grilles.
The necessary aeration can be achieved naturally or by way of the
installation of a forced aeration system depending on the norms in force in
the country where the installation is being made for ovens with a type “A1”
exhaust.
Be aware of the total nominal heat input of the ovens housed in
each room in a situation in which more than one unit is being
installed.
The Manufacturer cannot answer for damage caused by
ignoring these abovementioned norms as well as the information in
this manual.