REMOTE TRANSMITTER PROGRAMMIMG
BY MEANS OF EXTA LIFE APPLICATION
Remote programming allows to add push-buttons of a transmitter to a selected receiver without
a physical access to it (without pressing the PROG. push-button on a receiver). It is particularly
comfortable in case receivers are already mounted in a building and access to them is difficult.
Requirements regarding remote programming of transmitters with ROP-21 receiver:
• EXTA LIFE controller must be installed in the system,
• receivers, the transmitter will be remotely assigned to, must be powered and paired with a
controller,
• transmitters, we want to assign to receivers remotely, must be paired with a controller,
• during one step it is possible to add only one transmitter to one receiver.
In order to assign remotely selected push-buttons of a transmitter to the ROP-21 device the fol-
lowing is required:
1. Pair the selected receiver with a controller.
2. Pair the controller with a transmitter, which buttons you want to assign remotely to a receiver.
3. Choose the “Assign a receiver” option by means of a transmitter (
).
4. From the list of all paired receivers, choose the receiver (channel) the transmitter will be as-
signed to (
).
5. In the ‘Operation mode’ field select the mode the transmitter should cooperate with a receiver (
).
In case of ROP-21 the switch on / switch off, bistable, monostable and time modes are possible.
6. Choose push-buttons of a transmitter that will be assigned remotely to a receiver (
). In case
of time mode, it is required to define time value assigned to a selected push-button. Time can
be adjusted in the range from 1 second to 18 hours.
7. By pressing the “Transmitter preview” button, the system displays a transmitter with assigned
numbers of push-buttons (
).
8. By pressing the “Save” push-button, a transmitter is remotely programmed in a receiver. As a
confirmation, the system displays the following message “Devices have been correctly paired”.
It is also possible to assign remotely a transmitter to a receiver by means of a receiver. To do it,
choose the “Assign a transmitter” option from the menu of a receiver.
The following cases can occur during time mode programming:
The „Switch on” and „Switch off” buttons are the same – switching on and switching off a re-
ceiver before the adjusted time is over, is realised by means of the same push-button (it is, e.g.,
push-button “1” of P-457/4 remote control).
The „Switch on” and „Switch off” buttons are different – the “switch on” button realises only the
receiver’s (channel) switching on function, and the “switch off” button realises only the switch-
ing off function before the adjusted time is overu.
The “Switch off” button has not been defined – the situation is analogical as in point
.
