background image

1-CHANNEL RADIO FLUSH RECEIVER   

ROP-21

TECHNICAL DATA

Nominal supply voltage:

230 VAC 

Nominal frequency:

50/60 Hz

Nominal power consumption:

0,45 W – standby / 0,8 W – switched on output

Transmission:

radio – ISM band 868 MHz

Transmission way:

two-way - 9600 bps

Coding:

algorithm based on 128-bit key

Operating range:

up to 330 m in the open area

Optical signalling (transmission / program-

ming):

yes – RGB LED 

Number of paired buttons:

maximum 96 pairs

Current receiver’s mode information:

yes – in the EXTA LIFE mobile application

Operating modes in cooperation with EXTA 

LIFE system transmitters:

switch on /switch off, bistable, time

Operating modes in cooperation with EXTA 

LIFE controller:

switching on, switching off, time

Number of external inputs:

2

Cooperation with push-buttons*:

monostable (push-buttons), bistable

Operating modes for external inputs**:

only switching on, only switching off, bistable, 

monostable, time, switch on/switch off

Time adjustment range:

1 sec. ÷ 18 hrs.

Number of output channels:

1

Relay contact parameters:

1 x NO 5A / 250 VAC (NO dry contact) 

Maximum output load:

incandescent and halogen lighting sources – 750 W   

LEDs – 60 W

CFL lamps – 250 W

Number of terminal clamps:

6 (wires with cross-section up to 2,5 mm²)

Casing mounting:

Ø60 mm junction box

Operating temperature range:

-10 do +55 °C

Protection degree:

IP20

Protection class:

II

Dimensions:

47,5 x 47,5 x 20 mm

Weight: 

0,04 kg

Reference standards:

EN 60669, EN 60950, EN 61000 ETSI EN 300 220-

1, ETSI EN 300 220-2

*  switch type configured by means of the EXTA LIFE mobile application

** operating mode dependent on selected switch type 

Содержание ROP-21










Отзывы: