Z3-MVE-100 V1.05.01a
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 U.S.A.
♦
+1.402.323.0702
9
5.0
HOOKING UP AND RUNNING THE Z3-MVE-100
For this demonstration, you will need: a computer, a 1080p/1080i video source, a Z3-MVE-100, a
12V power supply, at least 1 HDMI cable, and at least 1 Ethernet cable.
To use and run the MVE-100, please follow these steps:
Figure 4 Z3-MVE-100 Demo Connections (Back)
5.1 Setting up the Video Source
(1) Select an HD source with HDMI non-HDCP output (in Z3’s testing, the Brite-View BV-5005HD is
used).
-Power on the HD Source
-Connect an HDMI cable from the HD Source to a monitor
-Set the HD Source to 1080p or 1080i output
-Select and begin playback of the content
If you see playback on the monitor, you’ve confirmed the source works. Now move the HDMI
cable from the monitor to “HDMI In” on the Z3-MVE-100 so that the cable runs from the HD
Source to the Z3-MVE-100 (see
Figure 4
).
5.2 Connecting the Z3-MVE-100
(2) Connect an Ethernet cable to “Ethernet” on the Z3-MVE-100 (see
Figure 4
)
. Connect the other
end of the Ethernet cable directly to a PC. You will use this PC to control the Z3-MVE-100 and
to decode the output stream.
-If you have an additional HDMI cable, you can connect “HDMI Out” to a monitor. This will
allow you to see the video being encoded in passthrough on the monitor.
(3) Connect the 12V power supply to “+12V DC” (see
Figure 4
)
.
(1) Connect
HDMI In
to Video
Source
(2) Connect
Ethernet
(3) Connect
Power
(4) Connect HDMI
Out to Monitor
(Optional)
