DOC-USR-0038-05
_______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
9
5.0
GETTING STARTED AND RUNNING THE Z3-MVE-02
For these steps, you will need: a computer, a 1080p30/1080i video source,
a Z3-MVE-02 Unit (included), a 12V power supply (included), an HDMI Cable, and at least 1 Ethernet cable.
5.1 Setting up the Video Source
(1)
Select an HD source with HDMI non-HDCP output (in Z3’s testing, the Brite-View BV-5005HD is used).
-Power on the HD Source
-Connect an HDMI cable from the HD Source to a monitor
-Set the HD Source to 1080p30 or 1080i output
-Select and begin playback of the content
If you see playback on the monitor, you’ve confirmed the source works.
(2)
Move the HDMI cable from the monitor to the Z3-MVE-02 “HDMI In” port.
5.2 Connecting and powering up the Z3-MVE-02
(3)
Connect an Ethernet cable to “Ethernet” on the Z3-MVE-02 (see
)
. Connect the other end of the
Ethernet cable directly to a PC. You will use this PC to control the Z3-MVE-02 and to decode the output
stream.
(4
) Connect the 12V power supply to “+12VDC” (see
)
.
Figure 4 Z3-MVE-02 Rear Panel Connections
(1)
Connect Video Source to HDMI In
(3)
Connect
Power
(2)
Connect
Ethernet
