Z3 Technology Z3-HE1080-RPS Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 59

background image

54

CONFIDENTIAL

DOC-USR-0097-05

____________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

STOPPED

indicates that the unit is not currently

encoding. Must be in this mode to make any
configuration changes.

POLLING

indicates “start” was pressed and the

encoder is waiting for valid input data to be
detected.

RUNNING

indicates the unit is currently encoding.

Error statuses will be preceded by an exclamation
point and include a description of the error.

Note 1: Encode Resolutions Supported:

WQVGA (320x180), QVGA (320x240), SIF (352x240), CIF (352x288), 2-CIF (352x576),

640x360, VGA (640x480), 4-CIF (704x576), 16:9 PAL (1024x576), D1 PAL (720x576)

D1 NTSC (720x480), 720p (1280x720), XGA (1280x1024), 1080p (1920x1080), Follow input

“Follow input” = Generate encoder resolution based on capture resolution detected

Note 2:

If input is interlaced, then Frame Rate will divide the number of fields used.  This means, a conversion
to progressive is done.  This method allows for a reduction in bits needed / processing power without
introducing extra jerkiness when there is motion in the video.  For example, if the input is 1080i at 60
fields per second (30 frames per second), Frame Rate Divider has the following effect:
        Frame Rate                 Output              # fields used           frame rate
                   Full                  1080i                      60                          30
                   Half                  1080p                     30                          30
                   Quarter             1080p                     15                          15
                   Sixth                 1080p                     10                          10

Note 3: GOP Sizes Supported:

10, 12, 15, 25, 30, 50, 60, 100, 120, 200, 240 Frames

10.5

The CH2 & CH3 Tabs (Channels 2 & 3)

The Z3-HE1080-RPS supports simultaneous encode into multiple different resolutions and bitrates. Each
output stream can be set using a separate Channel tab. See the CH1 Tab section for detailed
descriptions of available settings on the CH2 and CH3 tab. If these tabs are not present, you can create a
them by clicking on the “+” tab. Only three channels are supported.

CH2 Default:

Parameter

Options (default in bold)

Description

Encoder Setup

«
...
52
53
54
55
56
...
»

Содержание Z3-HE1080-RPS




























































Отзывы:

Нет отзывов

Похожие инструкции для Z3-HE1080-RPS

OmniConverter GPoE+/S

Бренд: OST Страницы: 10

Бренд: Oakley Страницы: 11

HUBNER BERLIN POG 10 + DSL

Бренд: Baumer Страницы: 36

Бренд: NEXENTRO Страницы: 8

Бренд: Cosel Страницы: 62

Бренд: Harman Kardon Страницы: 16

Бренд: YASKAWA Страницы: 120

Бренд: Badger Meter Страницы: 12

Бренд: Sunforce Страницы: 1

Бренд: SHENZHEN ENCOM ELECTRIC TECHNOLOGIES CO. Страницы: 30

Бренд: Vanner Страницы: 16

Бренд: Baudcom Страницы: 12

Бренд: EverFocus Страницы: 8

Бренд: Ibiza Страницы: 24

Бренд: Outback Power Systems Страницы: 88

Бренд: StarTech.com Страницы: 2

Бренд: WhisperGen Страницы: 84

Бренд: Digitrax Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды