Z3 Technology Z3-HE1080-RPS Скачать руководство пользователя страница 52

Страница: 52 / 59

CONFIDENTIAL

DOC-USR-0097-05

____________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

Output Format

RTP

RTSP

UDP
TSRTP
TSFILE
RTMP
ZIXI

Output format of the encoded IP stream.

If UDP is selected, don’t forget to check the value
of TS Rate to make sure it is in line with
expectation.

RTP requires an SDP file for the receiver that
corresponds with the video codec used.

RTSP requires the use of the RTSP URL.

TSRTP causes streaming of TS over RTP. This
format is required for encoding with Pro-MPEG
Forward Error Correction (FEC).

RTMP is only supported with H264(AVC) selected as
the Video Codec.

ZIXI causes streaming via Zixi Feeder

to a Zixi

Receiver

compatible device.

Dest Address

192.168.x.y

(192.168.0.6)

The IP address of the destination of the encoded
stream.

Dest Port

0 – 9999 (

8600

)

The destination port that the encoder is streaming
to.

Aux TS File Enable
(UDP/TSRTP Only)

True

False

Set to True to allow the same UDP or TSRTP stream
to be saved to a .ts file.

Output Device
(TSFILE/Aux TS File
Only)

Click this field to select the detected USB storage
device for .ts file destination.

File Prefix
(TSFILE/Aux TS File
Only)

MOV1_

Textbox to enter desired file name for .ts file.
Entered text will be followed by a number starting
with zero in the recorded file name.

Max File Size
(TSFILE/Aux TS File
Only)

(1024M)

Sets the file size at which a new .ts file is started.

Video PID

(UDP/TSRTP/TSFILE
Only)

0 – 8191 (

221

)

PID assigned to video in the TS stream.

PCR PID

(UDP/TSRTP/TSFILE
Only)

0 – 8191 (

521

)

PID assigned to PCR in the TS stream.

PCR Interval

(UDP/TSRTP/TSFILE
Only)

(

)

Interval assigned to PCR in the TS stream in
milliseconds.

PMT PID

(UDP/TSRTP/TSFILE
Only)

0 – 8191 (

)

PID assigned to PMT in the TS stream.

Video Max Delay

(UDP/TSRTP/TSFILE
Only)

(300)

Sets encoder maximum video delay in milliseconds.

Содержание Z3-HE1080-RPS




























































Результаты поиска

Содержание Z3-HE1080-RPS

Отзывы:

Похожие инструкции для Z3-HE1080-RPS

Бренды по названию

Популярные бренды

Z3 Technology Z3-HE1080-RPS, Инструкция пользователя

Результаты поиска

Содержание Z3-HE1080-RPS

Отзывы:

Похожие инструкции для Z3-HE1080-RPS

Бренды по названию

Популярные бренды