33
CONFIDENTIAL
DOC-USR-0097-05
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
(b)
By default, “MOV” is entered. This will result in a file entitled MOV0.ts on the USB.
Subsequent recordings will be entitled MOV1.ts, MOV2.ts, etc.
Click on the “Start” button. After a moment, the encoder status will change to RUNNING.
When your desired recording length has been reached, click on the Stop button.
Wait at least 10 seconds after stopping the encoding before disconnecting the USB storage device to
ensure that all buffered data is completely transferred.
You can verify your recording by connecting the USB device to your PC and opening the newly
created .ts file in VLC media player.
*Note:
The PC should be at least a quadcore or 8-core PC. If the PC is too slow, frame skips and
possibly video artifacts will be observed upon playback. VLC should be version 2.1.3 or newer.
7.21
Simultaneous Stream and Record
When streaming UDP or TSRTP, the TS stream can be simultaneously saved to a file on a USB storage
device.
(1)
Connect and configure the encoder “Output Format” to output “UDP” or “TSRTP”.
(2)
When UDP or TSRTP is selected, the “Aux TS File Enable” option appears. Select “True” using the
dropdown menu to enable an auxiliary .ts file recording.
(3)
The “Output Device” and “File Prefix” fields appear. Follow the steps in Section 7.20 to connect
your USB device and set these fields.
Figure 25 Channel 1 Tab – .ts File Encode
(2) Change
to “RTMP”
(1) If necessary, click “Stop”
(5) Click “Start”
(3) Click to populate with
detected USB device
(4) Set to desired
file prefix
