CONFIDENTIAL
Z3-DM8148-MC-RPS V2.00.02
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
35
(prerelease) (GCC) ) #1 Tue Aug 3
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ti8148evm
vram size = 20971520 at 0x0
bootconsole [earlycon0] enabled
ti81xx_reserve: ### Reserved DDR region @87f00000 reserved size = 20971520 at 0x0
FB: Reserving 20971520 bytes SDRAM for VRAM setting z3_edma_mem_size to 10485760 Memory
policy: ECC disabled, Data cache writeback OMAP chip is TI8148 3.0
SRAM: Mapped pa 0x402f1000 to va 0xfe400000 size: 0xf000 Built 1 zonelists in Zone
order, mobility grouping on. Total pages: 24576 Kernel command line:
console=ttyO0,115200,quiet ddr_mem=512M mem=128M vram=20M earlyprintk notifyko PID hash
table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384
(order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 96MB 1MB = 97MB total
Memory: 92328k/92328k available, 38744k reserved, 0K highmem Virtual kernel memory
layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA
: 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB) lowmem :
0xc0000000 - 0xc8000000 ( 128 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules :
0xbf000000 - 0xbfe00000 ( 14 MB) .init : 0xc0008000 - 0xc0040000 ( 224 kB) .text :
0xc0040000 - 0xc0527000 (5020 kB) .data : 0xc0528000 - 0xc0575d00 ( 312 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:407
IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts Total of 128
interrupts on 1 active controller GPMC revision 6.0 Trying to install interrupt handler
for IRQ400 Trying to install interrupt handler for IRQ401 Trying to install interrupt
handler for IRQ402 Trying to install interrupt handler for IRQ403 Trying to install
interrupt handler for IRQ404 Trying to install interrupt handler for IRQ405 Trying to
install interrupt handler for IRQ406 Trying to install type control for IRQ407 Trying to
set irq flags for IRQ407 OMAP clockevent source: GPTIMER1 at 20000000 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 719.25 BogoMIPS (lpj=3596288)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
TI81XX: Map 0x87f00000 to 0xfe500000 for dram barrier
TI81XX: Map 0x40300000 to 0xfe600000 for sram barrier
omap_voltage_early_init: voltage driver support not added
regulator: core version 0.5
regulator: dummy:
NET: Registered protocol family 16
omap_voltage_domain_lookup: Voltage driver init not yet happened.Faulting!
omap_voltage_add_dev: VDD specified does not exist!
OMAP GPIO hardware version 0.1
OMAP GPIO hardware version 0.1
OMAP GPIO hardware version 0.1
OMAP GPIO hardware version 0.1
omap_mux_init: Add partition: #1: core, flags: 4
NOR: Can't request GPMC CS
clk get on i2c3 fck failed
Cannot clk_get ck_32
