CONFIDENTIAL
Z3-DM8148-MC-RPS V2.00.02
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
29
(b)
Create /export/users and set it up:
# mkdir –p /export/users
# mount –bind /export/users /home/users
(c)
Add the following line to /etc/fstab:
/home/users /export/users none bind 0 0
(d)
Add an entry for the file system directory in /etc/exports. For example, the line would be
something like (here, 192.168.0.6 is the IP address of the PC, and 255.255.0.0 is the netmask):
/home/z3/z3-dm814x/filesys/fs 192.168.0.6/255.255.0.0(no_root_squash,insecure,nohide,rw,async)
(e)
Create symbolic links in your top-level directory to allow access to your filesys and images directory
(note: actual directory name may be different depending on your specific release):
# cd /home/z3/z3-dm814x
# ln –s z3-centaurus-dm814x
_
MC-RPS-20130819/images images
# ln –s z3-centaurus-dm814x_MC-RPS-20130819/filesys filesys
(f)
Start the NFS server
# sudo service nfs-kernel-server restart
(3
) Configure u-boot on your board to match your system configuration settings
(a)
Reboot the board with minicom or TeraTerm setup on your PC (see Steps (5) and (6) in Section 6).
(b)
As soon as u-boot starts, press the space bar immediately to make it stop in the u-boot prompt.
(c)
The next step is to prepare the environment variable script to match your own environment
settings. Got to the u-boot directory in the release directory and edit the file “u-boot-env-
centaurus-rdk.txt” (here emacs is used – any text editor can be used)
# cd /home/z3/z3-dm814x
# cd z3-centaurus-dm814x
_
MC-RPS-20130819
# cd u-boot
# emacs u-boot-env-centaurus-rdk.txt
