CONFIDENTIAL
DOC-USR-0011-04
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
8
2.0
QUICK START GUIDE
2.1
If you’ve received a system from Z3 with the software preloaded
To start working with the Z3-DM368-VI-RPS, you can go straight to Section 7.0, “RUNNING THE
ENCODER,” on page 14, or Section 8.0, “RUNNING THE DECODER,” on page 22. A description of
how to save to a file and play back that file can be found in Section 9.0, “WRITING TO AND
READING FROM A FILE”, on page 26.
2.2
If you already have a system from Z3 and need to update the firmware
You can update the firmware via SD Card by following the instructions in Section 12.0, “RUNNING
THE CODE YOU BUILT ON THE BOARD,” on page 32.
2.3
If you are ready to start development
Details on how to untar and build the code can be found in Section 5.0: “UNTARRING AND
BUILDING THE SAMPLE CODE,” on page 11.
Details on how to set up your system to access the code you have built can be found in Section
12.1, “Method 1: Updating the Image File,” on page 32.