CONFIDENTIAL
DOC-USR-0011-04
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
20
7.9
Using DHCP
The Z3-DM368-VI-RPS also supports using DHCP to acquire an IP address at boot-up. To use this
setting, complete the following steps:
(23)
Click the “Use DHCP” check box in the Web GUI. Once it is checked, you will see that the
values of Local IP Address, Local Netmask, and Default Gateway will gray out:
(24)
Click on “Save User”. Wait a couple seconds for the “Saved all to User” message to appear:
(25)
Power off the Z3-DM368-VI-RPS.
(26)
Power on the Z3-DM368-VI-RPS. Wait about one minute for the “ready” LED to turn on.
(1) Click “Save User”
(2) Wait for “Saved all to User” to appear in status
Figure 12 Saving “Use DHCP”
Figure 11 Using DHCP
(2) Values gray out
(1) Check “Use
DHCP”
