CONFIDENTIAL
DOC-USR-0011-04
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
22
Figure 15 Connections for Decoding to SDI
8.0
RUNNING THE DECODER
The Z3-DM368-VI-RPS also supports streaming decode and display via SDI. The steps below show how to use
the Z3-DM368-VI-RPS to decode a stream generated by another Z3-DM368-VI-RPS. Another example of
decode can be found in the section on reading and writing files.
8.1
Connect the Decoder Board
(1)
Connect the Ethernet to a hub/router connected to the streaming source.
(2)
Connect the Serial and 12V power.
(3)
Connect “SDI Out” of the Z3-DM368-VI-RPS to an SDI monitor (or to an SDI->HDMI converter
connected to an HDMI monitor).
8.2
Set up the Decoder Board to work with the Encoder Board
(4)
If you are using another Z3-DM368-VI-RPS as the encoding source, you need to make sure that
the encoding Z3-DM368-VI-RPS and decoding Z3-DM368-VI-RPS have different IP addresses. If you
are using DHCP, this will automatically be taken care of. If you are not using DHCP, you should
set at least one of them to use DHCP to ensure the addresses are different.
12V
Power
Ethernet
Serial
(Top)
SDI
Out
(Top)
