HE4K-DCK-1X User Instructions
DOC-USR-0123-06
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
74
Normally, this value should be set to
1.25 * (video b audio bitrate).
This can be set to higher values to allow
leeway for times when many bits are
needed to encode. This can be
especially useful for ensuring smooth
playback at lower bitrates.
TS Lowlat Mode
*
(UDP/TSRTP Only)
False
True
Selecting “True” causes the TS mixer to
instead send packets out as soon as it
receives them rather than buffering
them. This results in lower latency at
the expense of decreased network
efficiency and a less smooth bitstream.
There is a limit of 5Mbps for TS Lowlat
Mode.
Must be set to “False” for stream to be
compliant with ISO 13818-1 systems
specification for transport stream
timing.
Authentication (RTMP/RTSP/RTMPS
Only)
Disable
Enable
If authentication is required within the
Wowza streaming server, select
“Enable” to enter user credentials.
User (RTMP/RTSP/RTMPS Only)
Enter a valid Wowza user name.
Password
(RTMP/RTSP/RTMPS Only)
Enter a valid Wowza password.
Text Overlay Enable
True
False
Enables display text over video.
Overlay Text
ENCDEV
Textbox for entering display text.
Overlay Location
Top Left
Top Center
Top Right
Bottom Left
Bottom Center
Sets screen location of display text.