HE2K-DCK-10 User Instructions
DOC-USR-0122-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
33
with the same prefix will be detected and the new recordings will auto-increment to the next
number.
b.
For example, if the prefix
MOV1_
is provided. This will result in a file entitled
MOV1_0.ts
on
the USB. Subsequent recordings will be entitled
MOV1_1.ts
,
MOV1_2.ts
, etc.
c.
The default prefix provided is
MOV1_%F_%T_
which will pull the current date, in
year/month/day format, and time, in 24-hour notation, into the file name.
Note:
By default a limited selection of video encoding settings are available in the user interface. See Section
8.2, “Advanced Settings Mode”, for more information on accessing additional settings.
(8)
Click on the
Start
button. After a moment, the encoder status will change to
RUNNING
and the fields
above will appear in dark grey. The status LED on the unit will blink green when streaming.
(9)
When your desired recording length has been reached, click on the
Stop
button.
Verify the status light has stopped blinking green and wait at least 10 seconds after stopping the
encoding before disconnecting the USB storage device to ensure that all buffered data is completely
transferred.
Note:
If less space is available on the USB device than the
Max File Size
specified in the user interface, the oldest
files will be removed until there is sufficient space or no files remain. This check for available space is
performed when
start
is clicked and every time a new file is created.
(10)
You can verify your recording by connecting the USB device to your PC and opening the newly
created .ts file in VLC media player.
Figure 31
CH1 Tab Configuration – TSFILE
(3) Change
to “TSFILE”
(1) If necessary, click “Stop”
(6) Click “Start”
(4) Select device
(2) Verify settings
(5) Enter file
prefix
