HE2K-DCK-10 User Instructions
DOC-USR-0122-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
26
Note:
By default a limited selection of video encoding settings are available in the user interface. See Section
8.2, “Advanced Settings Mode”, for more information on accessing additional settings including Video Rate
Control and GOP Size.
(10)
Consult the YouTube live stream setup documentation available in YouTube’s online Live streaming
guide for recommended bitrates for your resolution.
(11)
Set
Authentication
to
Disable
as this field is not applicable to YouTube.
(12)
Click on the Start button. After a moment, the encoder status will change to RUNNING and the
fields above will appear in dark grey. The status LED on the unit will blink green when streaming.
(13)
Allow a few seconds for your video to appear in your YouTube live dashboard.
Figure 21 CH1 Tab Configuration – RTMP Streaming to YouTube Live
(4) Change
to “RTMP”
(1) If necessary, click “Stop”
(7) Click “Start”
(2) Set to
“1920x1080”
(3) Verify is
“H264(AVC)”
(5) Set to
“Server_URL/Stream_Key”
(6) Set to “Disable”